DeWALT® 7410SD1 SD1 Expansion Wedge Anchor, 3/8 in Dia, 2-1/4 in OAL, 7/8 in L Thread, Carbon Steel, Zinc Plated
DEWALT 7410SD1-PWR
MFG #: 7410SD1
$0.00
/ Box of 50
In Stock
- Type: Expansion
- Series: Wedge-All®
- Diameter: 3/8
- Overall Length: 2-1/4
- Thread Length: 1-1/8, 7/8
- Material: Carbon Steel
- Finish: Zinc Plated
- Minimum Embedment Depth: 1-3/4, 1-5/8
- Head Size: 9/16
- Drill Size: 3/8
- Head Type: Hex
- Thread Size: 3/8-16
- Head Style: Hex
- Thread Type: UNC
- Shear Strength: 2540, 570
- Tensile Strength: 261, 2685
DeWALT®, 7410SD1, Wedge Anchor, Expansion, Series: SD1, 3/8 in Diameter, 2-1/4 in Overall Length, 7/8 in Thread Length, Carbon Steel, Zinc Plated, 1-5/8 in Minimum Embedment Depth, 3/8 in Drill, 3/8-16 Thread, Hex Head, UNC Thread, 1/4 in Maximum Work Thickness, 2540 lb Shear Strength, 2685 lb Tensile Strength
- Code listed under IBC/IRC for grout-filled CMU per ICC-ESESR-1396
- Consistent performan
- Consistent performance in high and low strength concrete
- Nominal drill bit si
- Nominal drill bit size is the same as the anchor diameter
- One-piece, wrap-around clip ensures uniform holding capacity
- Anchor can be instal
- Anchor can be installed through standard fixture holes
- Threaded end is chamfered for ease of starting nut
- Anchor design allows for follow-up expansion after setting under tensile loading
- Available in a wide range of diameters and lengths
- Carbon steel ASTM A563 grade A nut
- Length ID code and i
- Length ID code and identifying marking stamped on head of each anchor
- Anchor design allows
- Anchor design allows for follow-up expansion after setting under tensile loading ultimate
- The minimum concrete thickness is 1-1/2 times the embedment depth
- Normal weight concre
- Normal weight concrete, structural sand-light weight concrete, concrete over steel deck an
- The allowable loads are based on a safety factor of 4
- 7/16 in minimum fixture hole
- 30 ft-lb installation torque
- 1560 lb at 2000 psi, 2880 lb at 4000 psi ultimate tension loads and 390 lb at 2000 psi, 55
- 2280 lb at 2000 psi ultimate shear loads and 570 lb at 2000/3000/4000 psi allowable shear
- Anchor body material meets minimum 70000 psi tensile strength
Code listed under IBC/IRC for grout-filled CMU per ICC-ESESR-1396
Consistent performance in high and low strength concrete
Consistent performance in high and low strength concrete
Nominal drill bit size is the same as the anchor diameter
Nominal drill bit size is the same as the anchor diameter
One-piece, wrap-around clip ensures uniform holding capacity
Anchor can be installed through standard fixture holes
Anchor can be installed through standard fixture holes
Threaded end is chamfered for ease of starting nut
Anchor design allows for follow-up expansion after setting under tensile loading
Available in a wide range of diameters and lengths
Carbon steel ASTM A563 grade A nut
Length ID code and identifying marking stamped on head of each anchor
Length ID code and identifying marking stamped on head of each anchor
Anchor design allows for follow-up expansion after setting under tensile loading ultimate pullout 5440 lb
Anchor design allows for follow-up expansion after setting under tensile loading ultimate pullout 5440 lb
The minimum concrete thickness is 1-1/2 times the embedment depth
Normal weight concrete, structural sand-light weight concrete, concrete over steel deck and grouted concrete masonry are applicable materials
Normal weight concrete, structural sand-light weight concrete, concrete over steel deck and grouted concrete masonry are applicable materials
The allowable loads are based on a safety factor of 4
7/16 in minimum fixture hole
30 ft-lb installation torque
1560 lb at 2000 psi, 2880 lb at 4000 psi ultimate tension loads and 390 lb at 2000 psi, 555 lb at 3000 psi, 720 at 4000 psi allowable tension load for concrete
2280 lb at 2000 psi ultimate shear loads and 570 lb at 2000/3000/4000 psi allowable shear load for concrete
Anchor body material meets minimum 70000 psi tensile strength