DeWALT® 7422SD1 SD1 Wedge Expansion Anchor, 1/2 in Dia, 3-3/4 in OAL, 2 in L Thread, Carbon Steel, Zinc Plated
DEWALT 7422SD1-PWR
MFG #: 7422SD1
$0.00
/ Box of 50
In Stock
- Series: Wedge-All®
- Diameter: 1/2
- Overall Length: 3-3/4, 3-3/4 in
- Thread Length: 2, 2 in, 2-5/16
- Material: Carbon Steel
- Finish: Zinc Plated
- Minimum Embedment Depth: 2-1/4, 2-1/4 in
- Head Size: 3/4
- Drill Size: 1/2
- Thread Size: 1/2-13
- Shear Strength: 4195, 4195 lb, 850
- Tensile Strength: 4155, 4155 lb, 871
DeWALT®, 7422SD1, Wedge Expansion Anchor, Series: SD1, 1/2 in Diameter, 3-3/4 in Overall Length, 2 in Thread Length, Carbon Steel, Zinc Plated, 2-1/4 in Minimum Embedment Depth, 1/2-13 Thread, Threaded Stud Head, UNC Thread, 1 in Maximum Work Thickness, 4195 lb Shear Strength, 4155 lb Tensile Strength
- Anchor is a fully th
- Anchor is a fully threaded, torque-controlled, wedge expansion anchor which is designed fo
- Code listed under IB
- Code listed under IBC/IRC for grout-filled CMU per ICC-ESESR-1396
- One-piece, wrap-arou
- One-piece, wrap-around clip ensures uniform holding capacity
- Suitable base materials include normal-weight concrete, structural sand-lightweight
- Ultimate load capaci
- 4195 lb ultimate loa
- 4195 lb ultimate load, 4195 lb 3000 psi concrete, 4195 lb 4000 psi concrete
- Suitable base materi
- Threaded end is cham
- Threaded end is chamfered for ease of starting nut
- 4155 lb, 4155 lb 300
- 4155 lb, 4155 lb 3000 psi concrete, 4500 lb 4000 psi concrete
- Anchor can be instal
- Available in a wide
- Available in a wide range of diameters and lengths
- Anchor design allows
- Carbon steel ASTM A563 grade A nut
- Nominal drill bit di
- The minimum concrete thickness is 1-1/2 times the embedment depth
- Length ID code and i
- The allowable loads are based on a safety factor of 4
- 9/16 in minimum fixture hole
- 60 ft-lb installation torque
- 3280 lb at 2000 psi/5280 lb at 4000 psi ultimate tension loads and 820 lb at 2000 psi, 136
- 6560 lb at 2000 psi ultimate and 1345 lb at 2000 psi, 1485 lb at 3000 psi, 1625 lb at 4000
- Anchor body material meets minimum 70000 psi tensile strength
Anchor is a fully threaded, torque-controlled, wedge expansion anchor which is designed for consistent performance in cracked and uncracked concrete
Anchor is a fully threaded, torque-controlled, wedge expansion anchor which is designed for consistent performance in cracked and uncracked concrete
• Code listed under IBC/IRC for grout-filled CMU per ICC-ESESR-1396
Code listed under IBC/IRC for grout-filled CMU per ICC-ESESR-1396
• One-piece, wrap-around clip ensures uniform holding capacity
One-piece, wrap-around clip ensures uniform holding capacity
Suitable base materials include normal-weight concrete, structural sand-lightweight
Ultimate load capacity: 3800 lb tensile strength when embedded in 2500 psi, 4155 lb tensile strength when embedded in 3000 psi and 4800 lb tensile strength when embedded in 4000 psi compressive strength concrete
4195 lb ultimate load, 4195 lb 3000 psi concrete, 4195 lb 4000 psi concrete
4195 lb ultimate load, 4195 lb 3000 psi concrete, 4195 lb 4000 psi concrete
Suitable base materials include normal-weight concrete, structural sand-lightweight
• Threaded end is chamfered for ease of starting nut
Threaded end is chamfered for ease of starting nut
4155 lb, 4155 lb 3000 psi concrete, 4500 lb 4000 psi concrete
4155 lb, 4155 lb 3000 psi concrete, 4500 lb 4000 psi concrete
Anchor can be installed through standard fixture holes
• Available in a wide range of diameters and lengths
Available in a wide range of diameters and lengths
Anchor design allows for follow-up expansion after setting under tensile loading
Carbon steel ASTM A563 grade A nut
Nominal drill bit diameter same as Anchor diameter
The minimum concrete thickness is 1-1/2 times the embedment depth
Length ID code and identifying marking stamped on head of each Anchor
The allowable loads are based on a safety factor of 4
9/16 in minimum fixture hole
60 ft-lb installation torque
3280 lb at 2000 psi/5280 lb at 4000 psi ultimate tension loads and 820 lb at 2000 psi, 1360 lb at 4000 allowable tension loads for concrete
6560 lb at 2000 psi ultimate and 1345 lb at 2000 psi, 1485 lb at 3000 psi, 1625 lb at 4000 psi allowable shear loads for concrete
Anchor body material meets minimum 70000 psi tensile strength